- 1). Lay the closed cell foam on the worktable and secure the foam with masking tape. You can skip this step if your worktable has a wood surface.
- 2). Lay the uncoated metal on the surface of the worktable.
- 3). Smooth out scratches and blemishes on the surface of the metal with the 200-grit sandpaper. If you are preparing stainless steel, sand the metal with the grain of the metal.
- 4). Cut the scouring pad into a manageable size with a pair of scissors. The cut pieces of pad should fit comfortably into your hand.
- 5). Scour the surface of the metal with the cut pieces of scouring pad to smooth out the sanding marks left by the 200-grit sandpaper.
- 6). Spray the surface of the metal liberally with the metal cleaner and let the cleaner rest on the metal for the time recommended by the metal cleaner manufacturer.
- 7). Wipe the surface of the metal with clean rags to remove the metal cleaner, contaminants and sanding debris from the metal's surface to complete the metal polishing preparation.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post