- 1). Assemble the Waring juice extractor by placing the pulp collector bowl (the largest bowl-shaped object) into the motor housing. Fit the straining basket inside the pulp collector bowl. Place the lid and feeding tube over the pulp collector bowl and turn the lid counterclockwise until it locks. The lid nose should line up with the juice spout and make a snapping sound to indicate a successful lock.
- 2). Place the Waring juicer on a flat and dry surface. Prepare any vegetable or fruit by cutting it into appropriately sized pieces so they will fit into the feed tube. You do not have to peel anything, and if you choose not to be sure to wash the produce thoroughly.
- 3). Place the stainless steel collector cup beneath the juice spout. Plug in the juice extractor and turn it on. Put one piece of the vegetable or fruit into the feeding tube at a time and push it down using the plastic pusher. Do this until all of your vegetable or fruit has been juiced or until the collector cup is full.
- 4). Turn off and unplug the juice extractor. Disassemble the machine and rinse each part with cold water. Scrub each part with a soft sponge in hot soapy water or place them on the top rack of your dish washer. Wipe the inside of the motor housing with a slightly moist cloth or paper towel.
- 5). Reassemble the Waring juicer once each part has been cleaned and store or display it on your counter for later use.
- Advertisement -
- Advertisement -