- 1). Cut six pieces of plywood 5 7/8 inches each, and two 7 inches by 5 inches using the saw knife.
- 2). Join three of the 5 7/8-inch pieces of plywood, using the ½-inch finishing nails to form a triangle.
- 3). Apply waterproof glue along the joint edge.
- 4). Follow the same procedure with the other three 5 7/8-inch pieces of plywood. Now you have two triangles. Attach them together using the ½-inch finishing nails, but one triangle must be upside down above the other.
- 5). Nail the places in which they intersect to prevent breakage.
- 6). Drill a hole in the front section with the 1 3/8-inch hole saw. The hole must be 2 inches wide and 4 inches high. Smooth the edges of the hole with the sandpaper.
- 7). Take the two 7-by-5 pieces of plywood and put each one on the topmost sides of the star-shaped birdhouse. Attach the edges of the 7-by-5 pieces of plywood together with the finishing nails; this will be your roof. Finally, nail the roof to the star-shaped birdhouse. The center of the roof must be placed on the peak of the triangle-shaped plywood.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post