- 1). Wipe the outside of the watch and band with a soft cloth to remove any moisture on the outer area.
- 2). Slip the tip of a watch-back remover or a thin screwdriver into the groove on the back of the watch. Push the tip slowly under the watch back and along the groove to remove it from the watch. Using the same tool, slip the end along the groove around the watch face and pop off the top.
- 3). Lay the back and the watch face down on a towel outside in direct sunlight for two hours. The warmth of the sun's rays should dry the moisture within the watch.
- 4). Set the back of the watch and the watch face on a cloth inside your home if you do not have access to outside space. Set a blow dryer to low heat. Hold the dryer 6 inches from the watch. Using the low setting, blow warm air into the watch for five minutes. Allow the watch to remain on the cloth for another 30 minutes before putting the watch back together. Fit the cover over the top of the watch and push it back on; do the same for the back.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post