Keeping your hooked blades and concave blades away from wetness and air moisture is a must for keeping your knives in the very best working order. Wetness attracts dust to the knife and its surface and can lead to the blade becoming corroded. It is also a must to keep your knife blades away from water that contains salt and chemicals or solvents of any kind. The moisture and perspiration from skin can also have a corrosive effect on some hooked and concave blades. It is a good idea to wipe down a blade with a dry cloth or tissue.
It"s very important to look after your knives before, during and after you have used them. Hooked blades and concave blade blades should be kept in a place that is cool and dry when they are not being used. This will help to keep them in the best condition and preferably away from dust too.
You can use water to keep your hooked blades and concave blades clean, as long as you take care. Soap and hot water can be used to give them a thorough cleaning, and can get rid of any dirt or oil that has built up. You must be careful when you use water though because it can cause corrosion to the blade of the knife. If you have to use soap and water on your hooked blade or concave blade, you need to ensure that the blade is rinsed with hot water afterwards to get rid of any of the soap that may remain. The knife must also be dried properly afterwards using a cloth that is lint free.
You can use sandpaper in some circumstances to get the rust off your hooked blade or concave blade. If you want to be very precise, you can use an emery board. This is a gentle alternative to sand paper if the buffing side of the emery board is used.
If you would like to remove any rust from your hooked blades or concave blades, there are a few techniques that you can use. For an older knife, oil it well and then let it rest for about a week. You can then scrape away the spots of rust with another knife, as long as it is very sharp and stiff. It is a must not to rush this process because though because you"re hooked blades and concave blades are delicate and only the actual rust needs to be taken off.
To keep your hooked blades and concave blades in the best working order, it is advisable to maintain them properly. By checking your blade on a regular basis, you can keep the bevel in good shape and make it last as a sharp blade. Know more about safety knife please visit here for more information: http://www.knife-point.co.uk/