Home & Garden Maintenance & Repairs

Bathroom Ball Faucet Repair

By Home & Garden Last updated Wednesday, June/12/2024

1). Shut off the water supply by finding the valve under the sink and turning it to the right.
2). Place the cover on the sink drain and close it so you do not lose any small parts down it.
3). Loosen the screw that holds the faucet handle and remove it.
4). Remove the cap and collar of the faucet with adjustable pliers. Use the pliers to loosen the faucet cam and the washer and the ball.
5). Pull out the faucet spring and seal with a pair of needle-nose pliers. Remove the old O rings or cut them off with a utility knife if they are difficult to take off. Replace the new parts in the opposite order from how you pulled them off.
6). Turn the water back on and check that the faucet works properly.