- 1). Wrap electrical tape around the wire rope in the location where you wish to cut it.
- 2). Hold the wire rope on a flat surface and cut it just below the electrical tape with a side grinder. A clean straight cut is needed.
- 3). Turn back the rope to the length listed in the chart in the resource section. This length is specified by the diameter of the rope.
- 4). Insert the saddle in the looped end of the rope.
- 5). Wrap the first rope clamp around both wires about 1 inch from the cut end. Tighten each bolt until they are snug, and then torque them to the specification recommended in the resource chart.
- 6). Wrap the second clamp around both wire ropes, as close to the saddle as possible. Torque the two bolts to the recommended specification.
- 7). Install additional clamps evenly spaced between the first two clamps and torque their bolts to the correct pressure.
- Advertisement -
"Home & Garden" MOST POPULAR
- Advertisement -
EDITOR PICKS & Articles
- Top 4 Beaches Of Kerala
- Ten Places to Shop For Arts And Crafts In Snowdonia
- Monte Albán Mexico: An Ancient, Cultural, Natural Destination And Discover the Most Energetic and In
- Jim Corbett National Park Tour And Resorts To Experience Exotic Wild Life
- Spring Walking Week in Jersey - The Perfect Time to Explore
- Holidays to Dubai
- Things to do in Nanded
- Tips When Traveling With Children by Bus
- Spring Break in Mexico
- All You Want to Know About Hyderabad
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
"Home & Garden" Categories
Stay With Us
"Home & Garden" MOST POPULAR
"Home & Garden" Lastest Articles