There are many edging techniques you can use for your garden.
An edging can be constructed with a variety of materials as long as you are willing to be a creative person.
Whether you want a simple or high-class garden edge there are ways to create it.
If you like it when your home looks natural and beautiful, you may use special flowering plants.
In this article two techniques of edging will be discussed.
The first method entails use of brick and cement pavers.
This is a professional means of creating a border for your garden.
Read the following steps to learn how this technique works.
- Measure the brick and cement pavers to ascertain the width required for a trench to accommodate them.
- Dig a trench along the edge of your garden.
Ensure the trench is two times as wide as the pavers themselves.
It should be about seven inches deeper along with the height of our paving blocks.
To do perfect work you may require a shovel, a spade and a half-moon edger.
- Pour gravel or crushed rock in the trench so that it occupies about six inches.
You should add a little amount of gravel as you pack it tightly with your feet.
Plate compactors or hand tampers will be too large for a narrow trench such as this.
- Add a one-inch layer of sand evenly over the compressed gravel foundation layer.
Use a leveling device to check the level of sand.
If it is uneven you could either add or remove some of it until you have achieved the level you need.
- Now put the brick and cement pavers in the trench.
A side by side pattern is the most preferred.
Push the pavers closer and tighter so that they do not move easily if stepped on.
With a rubber mallet, gently hit the top surfaces of the pavers to reinforce them into the sand layer.
Be sure to keep level as you continue to add more blocks.
- If you want to restrain the outer side of the pavers, use plastic edge restraints and ten-inch steel spikes along the length of the paved surface.
- Sweep the sand particles into crevices around the laid bricks and cement pavers and then sprinkle lightly with water.
Repeat this step until all cracks are filled with sand.
- Add garden soil around the paver edging restraints and finish off with a layer of mulch.
Another method of edging a garden is using rocks and plants.
These two things will look very natural and stunning.
The plants and rocks trick is used when one wants to set up an edge that can separate the garden from the patio or lawn.
Rocks will look great outside of plants.
To begin, dig up a small trench.
Next, add sand to the trench to lay a foundation.
Bury the bottom parts of your rocks so that they can appear as natural as possible.
It is important to choose your plants carefully.
Most experts recommend using sweet-smelling plants.
Ornamental home turf or some fruit or vegetable plants are okay as well.
An edging can be constructed with a variety of materials as long as you are willing to be a creative person.
Whether you want a simple or high-class garden edge there are ways to create it.
If you like it when your home looks natural and beautiful, you may use special flowering plants.
In this article two techniques of edging will be discussed.
The first method entails use of brick and cement pavers.
This is a professional means of creating a border for your garden.
Read the following steps to learn how this technique works.
- Measure the brick and cement pavers to ascertain the width required for a trench to accommodate them.
- Dig a trench along the edge of your garden.
Ensure the trench is two times as wide as the pavers themselves.
It should be about seven inches deeper along with the height of our paving blocks.
To do perfect work you may require a shovel, a spade and a half-moon edger.
- Pour gravel or crushed rock in the trench so that it occupies about six inches.
You should add a little amount of gravel as you pack it tightly with your feet.
Plate compactors or hand tampers will be too large for a narrow trench such as this.
- Add a one-inch layer of sand evenly over the compressed gravel foundation layer.
Use a leveling device to check the level of sand.
If it is uneven you could either add or remove some of it until you have achieved the level you need.
- Now put the brick and cement pavers in the trench.
A side by side pattern is the most preferred.
Push the pavers closer and tighter so that they do not move easily if stepped on.
With a rubber mallet, gently hit the top surfaces of the pavers to reinforce them into the sand layer.
Be sure to keep level as you continue to add more blocks.
- If you want to restrain the outer side of the pavers, use plastic edge restraints and ten-inch steel spikes along the length of the paved surface.
- Sweep the sand particles into crevices around the laid bricks and cement pavers and then sprinkle lightly with water.
Repeat this step until all cracks are filled with sand.
- Add garden soil around the paver edging restraints and finish off with a layer of mulch.
Another method of edging a garden is using rocks and plants.
These two things will look very natural and stunning.
The plants and rocks trick is used when one wants to set up an edge that can separate the garden from the patio or lawn.
Rocks will look great outside of plants.
To begin, dig up a small trench.
Next, add sand to the trench to lay a foundation.
Bury the bottom parts of your rocks so that they can appear as natural as possible.
It is important to choose your plants carefully.
Most experts recommend using sweet-smelling plants.
Ornamental home turf or some fruit or vegetable plants are okay as well.