How to Replace a Power Window Switch on a 1995 Chevrolet Lumina
- 1). Unscrew the single screw that is inside the driver side door handle with a Phillips head screwdriver.
- 2). Use a flat head screwdriver to pry up the plastic panel inside of the door handle.
- 3). Disconnect the electric wiring harness from the switches on the plastic panel by pressing on the tabs of the connector and then pulling it off.
- 4). Remove the old switch and put the new one in its place. Use your hands to remove the switches to avoid the chance of damaging the new switch.
- 5). Plug the wiring harness into the back of the switches.
- 6). Place the plastic panel back into the door handle and secure it with the screw you removed earlier.