- 1). Open the front doors of your vehicle and lower the mounting brackets on the windshield.
- 2). Lift the top onto the vehicle with the help of an assistant. Slide the hard top to the windshield. Make sure the hard top is in the correct location on the vehicle.
- 3). Place the mounting clamps through the hole in the hard top and press them in the lock position with your hand.
- 4). Install the bolts into the holes along the inside edge of the hardtop. Thread the nuts onto the bolts and tighten them using a wrench.
- 5). Connect the wiring harness for the rear windshield wiper motor by pressing the two connectors together and listen for the tabs to click in place.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time