- 1). Place the a-frame in the hydraulic press so that it's oriented vertically in the press. Make sure that the steel portion of the A-frame by one of the bushings is on the press stands.
- 2). Find a socket that is the same diameter as the rubber bushing on the A-frame and is smaller than the steel portion of the A-frame.
- 3). Lower the press down onto the socket until the press contacts the socket. Continue lowering the press until the socket pushes the bushing all the way through the A-frame and is removed from the arm.
- 4). Repeat Steps 1 to 3 for the remaining bushing in the A-frame.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time