As they say if you want things done right then you better do it yourself. Instead of spending a lot of money to acquisition a rc helicopter which might not be of the best quality that you want, then it is better to make your own helicopter. Most off the people assume that it very hard to do it but if one knows the trick then it is very simple. Making it on your own will help you know how to repair it very quickly incase of an accident or if one of the parts is lose and not functioning as expected.
The tools and materials that are used are locally available and this makes it cheap to make your own remote control helicopter. The kinds of material that one will need are cog wheels, shafts which will be used to make the real shafts. This can be instituted in the CD-ROMs. The main shaft will be fit on the body by an aerial tube that belongs to the RC remote. This is because its small whole will reduce the friction. The main body will be made of a strip of wood and these parts will be attached together by some glue. For the tail a tiny bar of wood will be used. Some dry cells will be required to produce energy so that the helicopter may be able to fly. A few motors and a tape to join the parts that the glue cannot.
The first step when making your personal remote control helicopter is to make a small hole on the strip of wood. The hole should be large enough for the aerial to fit on it and once fitted it should be glue for that it becomes firm. Get the biggest cog wheel and place it on the main shaft. On the same piece of wood, another hole should be made and a motor fixed closely to the shaft. As much as the shaft should be close to the motor, you should ensure that there is a small space which will be used to fix the motor to the shaft using a pin down. When you do this then the body is completed and one should start working on the tail.
Take another long piece of wood and fix a smaller motor on one end. Fasten it well using superglue. Then go and finish with the blades. The blades of the remote control helicopter should be made with a very light piece of wood. Make sure that the areas that you are cutting should be straight. Then look for cut another small piece of wool and fix it between the long pieces of wood. Make a small hole in the small wood and attach the wood with the best wood that is available.
Once all this parts have been made, you should do the final thing and that is to assemble all of it in one place. Immediately you join all the parts then you will have made your own remote control helicopter. However after making it, it is important to be careful when trying to fly it since if one of the parts was not well fitted then it may cause a lot of damages.
The tools and materials that are used are locally available and this makes it cheap to make your own remote control helicopter. The kinds of material that one will need are cog wheels, shafts which will be used to make the real shafts. This can be instituted in the CD-ROMs. The main shaft will be fit on the body by an aerial tube that belongs to the RC remote. This is because its small whole will reduce the friction. The main body will be made of a strip of wood and these parts will be attached together by some glue. For the tail a tiny bar of wood will be used. Some dry cells will be required to produce energy so that the helicopter may be able to fly. A few motors and a tape to join the parts that the glue cannot.
The first step when making your personal remote control helicopter is to make a small hole on the strip of wood. The hole should be large enough for the aerial to fit on it and once fitted it should be glue for that it becomes firm. Get the biggest cog wheel and place it on the main shaft. On the same piece of wood, another hole should be made and a motor fixed closely to the shaft. As much as the shaft should be close to the motor, you should ensure that there is a small space which will be used to fix the motor to the shaft using a pin down. When you do this then the body is completed and one should start working on the tail.
Take another long piece of wood and fix a smaller motor on one end. Fasten it well using superglue. Then go and finish with the blades. The blades of the remote control helicopter should be made with a very light piece of wood. Make sure that the areas that you are cutting should be straight. Then look for cut another small piece of wool and fix it between the long pieces of wood. Make a small hole in the small wood and attach the wood with the best wood that is available.
Once all this parts have been made, you should do the final thing and that is to assemble all of it in one place. Immediately you join all the parts then you will have made your own remote control helicopter. However after making it, it is important to be careful when trying to fly it since if one of the parts was not well fitted then it may cause a lot of damages.