- 1). Roll the window up and open the door.
- 2). Remove the door panel from the door. Remove the screw from the center of the door latch handle and from the center of the window crank with a screwdriver. Pull both components off the door. Remove the two mounting bolts from the arm rest with a socket wrench. Pry the door panel off the door with either a small putty knife or a flat-head screwdriver.
- 3). Remove the three bolts that secure the vent window to the door frame with a socket wrench. A single bolt is located at the bottom of the vertical rod attached to the bottom of the window. Two bolts are located at the base of the window frame. Access these two bolts through the access holes in the door frame.
- 4). Lift the vent window out of the door.
- 5). Remove the two metal catches from the main window frame. The catches look like a hook. One catch is located on each end of the window frame. Each catch is secured to the frame with a single bolt. Remove the two bolts and lift the catches out of the interior of the door.
- 6). Position the window crank on its gear. Roll the window up to access the bottom of the window frame from the outside of the door.
- 7). Pull the window's regulator arms out of the tracks on the bottom of the door frame to release the window.
- 8). Slide the window regulator's arms into the tracks on the bottom of the door frame.
- 9). Roll the window down until the window frame descends into the interior of the door.
- 10
Position the two metal catches against the bottom of the window frame. Secure the catches in place with the two bolts. - 11
Roll the window all the way up. - 12
Lower the vent window assembly into the interior of the door. Install and tighten the assembly's three retaining bolts with a socket wrench. - 13
Press the door panel onto the door until the clips on the back of the panel engage with their holes on the door. - 14
Install and tighten the arm rest's two bolts with a wrench to secure the arm rests against the door panel. - 15
Install and tighten the window regulator and door latch handle screws with a screwdriver to secure the two components to the door.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post