Do you want your old T-Model car to be speedy like a new car? But cannot do it due to shortage of budget? Don't worry, if you have a late model engine, you can easily put it into your T-model by following the easy procedures given below.
Procedure Collect Necessary Equipment: • First of all you need some tools to install late model engine into your T-model.
Some basic tools are screw driver, wire cutter, jack and lever, lifter.
Hoist Your Car: • For installing late model engine you should hoist your car first because you will have to do some other staffs before changing engine.
Use jack and lever to hoist your car.
Drain lubricants and unplug wires: • Then drain lubricants from your car engine and remove electrical wires.
Unplug the battery but you can leave the sparking plugs.
Remove Fan and air conditioning compressor: • Remove the cooling fan from the engine and the intake air filter connection.
Also cut off the connection of air conditioning compressor connection.
Take the engine out: • First remove the connections of transmission line.
• Cut off the exhaust pipe connection from the engine.
• Pull out all connections that lead to the motor from the engine.
• After being confirmed that all connections from the engine have been removed, uplift the engine from the T-model car with the help of a lifter and place it in a stable place.
Please make sure before lifting that you have tied the engine tightly, otherwise while lifting it may fell down and get damaged.
Install the late model engine: • After removing the old engine successfully from your favorite T-model car it's time to install the new one.
At first tie up the engine properly with strong wires and lift it up with the help of a lifter.
Place it inside the bonnet in the same place where the previous engine was.
For this, you have to make sure previously that your new engine is of same size as the previous one.
• Now screw the bolt and bits tightly to ensure safety.
• Connect the cooling fan, exhaust pipe and intake air filter to the engine.
• Plug in the electrical connections again and connect the air conditioning compressor with the engine.
• Plug the ground connection to the battery.
• Connect the transmission line and check it.
• Check-out all hydraulic connections.
Start the car: • After making all connections correctly, remove the jack and lever, start the car and go for a test drive with your favorite customized T-model car.
Be Safe: • Don't forget to check that you have screwed the bolt and bits tightly and while lifting the engine tie it up properly.
Procedure Collect Necessary Equipment: • First of all you need some tools to install late model engine into your T-model.
Some basic tools are screw driver, wire cutter, jack and lever, lifter.
Hoist Your Car: • For installing late model engine you should hoist your car first because you will have to do some other staffs before changing engine.
Use jack and lever to hoist your car.
Drain lubricants and unplug wires: • Then drain lubricants from your car engine and remove electrical wires.
Unplug the battery but you can leave the sparking plugs.
Remove Fan and air conditioning compressor: • Remove the cooling fan from the engine and the intake air filter connection.
Also cut off the connection of air conditioning compressor connection.
Take the engine out: • First remove the connections of transmission line.
• Cut off the exhaust pipe connection from the engine.
• Pull out all connections that lead to the motor from the engine.
• After being confirmed that all connections from the engine have been removed, uplift the engine from the T-model car with the help of a lifter and place it in a stable place.
Please make sure before lifting that you have tied the engine tightly, otherwise while lifting it may fell down and get damaged.
Install the late model engine: • After removing the old engine successfully from your favorite T-model car it's time to install the new one.
At first tie up the engine properly with strong wires and lift it up with the help of a lifter.
Place it inside the bonnet in the same place where the previous engine was.
For this, you have to make sure previously that your new engine is of same size as the previous one.
• Now screw the bolt and bits tightly to ensure safety.
• Connect the cooling fan, exhaust pipe and intake air filter to the engine.
• Plug in the electrical connections again and connect the air conditioning compressor with the engine.
• Plug the ground connection to the battery.
• Connect the transmission line and check it.
• Check-out all hydraulic connections.
Start the car: • After making all connections correctly, remove the jack and lever, start the car and go for a test drive with your favorite customized T-model car.
Be Safe: • Don't forget to check that you have screwed the bolt and bits tightly and while lifting the engine tie it up properly.