- 1). Raise the front of the vehicle, using the floor jack, then support it with jack stands. The sensor is located below the coil pack on 2.2-liter engines, and above the oil filter on 2.3- and 2.4-liter engines. Unplug the crankshaft position sensor's wiring harness connector, using your fingers.
- 2). Remove the retaining bolt, using the appropriate socket. Pull the sensor out of the block.
- 3). Lubricate the O-ring with engine oil and slide it on the sensor. Install the sensor and tighten the retaining bolt to 71 inch-pounds of torque on 2.2-liter engine, and 88 inch-pounds of torque on the 2.3- and 2.4-liter engines. Plug in the wiring harness connector, ensuring that it snaps into place.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post