- 1). Raise the front end of the Camaro with a floor jack. Position jack stands beneath the vehicle's frame rails and lower the Camaro onto the stands.
- 2). Crawl beneath the vehicle and remove the screws securing the plastic splash guard to the front underside of the vehicle. Pull the splash guard off the Camaro.
- 3). Reach behind the turn signal assembly and grab the bulb socket. Twist this socket counterclockwise to unlock it, and pull the socket away from the assembly.
- 4). Pull the failed bulb from the socket with a slight wiggling motion. Grab a new 3157 bulb, using a clean, lint-free cloth, and press it into the socket. Do not touch the bulb with your bare hands, as the oils from your hands may cause early bulb failure.
- 5). Insert the socket and new bulb into the rear of the turn signal assembly and twist the socket clockwise to lock it in place.
- 6). Set the splash guard back in place, then tighten the screws with a Phillips screwdriver.
- 7). Lift the Camaro from the jack stands, using a floor jack, and remove the stands. Lower the Camaro to the ground.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post