How to Remove a Front Speaker Grill in a 2001 Suburban
- 1). Roll down the window of the door that you will be working on.
- 2). Pry off the door lock using the trim panel removal tool. Insert the end of the tool under the plastic outer ring and gently pry the door lock loose. Once free, remove the lock and set it aside.
- 3). Remove the electrical panel that contains the power door lock, power window and mirror controls. Insert the trim panel removal tool in the gap between the bottom of the panel and the door panel to pry it loose.
- 4). Disconnect the wire harnesses connected to the electrical panel by pressing in the tabs on the sides and separating the harnesses.
- 5). Remove the 7mm bolt located behind the control panel, securing the door panel to the door.
- 6). Remove the other 7mm bolt located below the arm rest, on the left side of the handle gap.
- 7). Remove the plastic trim surrounding the door handle using the trim panel removal tool. Slide it around the door handle to remove it, once it is loose.
- 8). Remove the triangle mirror cover with the trim panel removal tool and slide the panel up to remove it.
- 9). Remove the reflector lamp on the bottom left of the door panel with the trim panel removal tool or a small screwdriver. Once free, disconnect the wire harness by pushing in on the tab and separating the two harnesses.
- 10
Lift the entire door panel upward and away from the body. If necessary, remove the plastic dust cover to expose the door speaker.