- 1). Disconnect the negative battery cable by loosening the nut on the cable clamp, using the socket wrench, and sliding the clamp off the negative terminal.
- 2). Remove the electrical plug from the MAP sensor on the intake manifold, which is at the back of the engine.
- 3). Remove the vacuum hose on the MAP sensor: squeeze the tabs on the retaining ring with a pair of pliers, and slide the ring out of the way; then pull the hose off the MAP sensor.
- 4). Remove the two screws from the MAP sensor, and pull the sensor off the manifold.
- 5). Install the new sensor. Installation is the reverse of removal.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
Next Post