How to Remove the Torsion Bar of a 1992 Chevy Pickup
- 1). Place the jack under the Chevy. Raise the truck to a comfortable level.
- 2). Use a wheel wrench to loosen the wheel nuts and remove both front wheels.
- 3). Support the lower control arm with a floor jack.
- 4). Increase the tension on the adjusting arm with the J-36202 tool.
- 5). Remove the adjustment bolt with a socket wrench. Lift off the retaining plate from the bar.
- 6). Slide the torsion bar forward and remove the adjusting arms.
- 7). Remove the two nuts and two bolts from the bar support crossmember and slide the bar to the back of the truck.
- 8). Remove the support crossmember bar. Remove the retainer, the spacer, and the bushing from the support crossmember.