- 1). Pull the Kreepy Krauly out of the water, or if it is the first time being assembled, turn the unit over.
- 2). Straighten the new roller bumper out to find the top and bottom ends. The end with the rubber coils around the hose is the bottom and the narrow end is the top. If replacing an old roller bumper, pull the two attachment tabs out from the main unit and remove the older roller bumper.
- 3). Slide the bottom flat clip into the slot on the underside of the main body of the pump.
- 4). Run the roller bumper up the underside of the Kreepy Krauley and insert the top flat locking end cap into the pump's swivel head.
- 5). Let the roller bumper hang under the Kreepy Krauley main unit during use and storage.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post