- 1). Remove the grass deflector. Undo the screw or bolt at the point the wide plastic shield---the grass deflector---meets the shaft.
- 2). Place a holding pin through the slot in the grass cover, the upper flange washer and the gear head.
- 3). Remove the string head by turning it clockwise. Keep these bits safe. You'll need them again to convert the device back into a weed eater.
- 4). Secure the blade guard onto the shaft with a screw .It goes where the grass deflector was.
- 5). Center the blade on the upper flange washer. The blade should be flat. You'll see a shoulder on the upper flange washer which should insert into the center hole of the blade or saw.
- 6). Put the lower flange washer on. Its raised center should be away from the blade.
- 7). Install the nut guard---the cup-like bit---and the blade nut onto the gear head. You should use a holding pin on the upper flange washer and the gear head while you do this. Turn the blade nut counterclockwise.
- Advertisement -
- Advertisement -
EDITOR PICKS & Articles
- Top 4 Beaches Of Kerala
- Ten Places to Shop For Arts And Crafts In Snowdonia
- Monte Albán Mexico: An Ancient, Cultural, Natural Destination And Discover the Most Energetic and In
- Jim Corbett National Park Tour And Resorts To Experience Exotic Wild Life
- Spring Walking Week in Jersey - The Perfect Time to Explore
- Holidays to Dubai
- Things to do in Nanded
- Tips When Traveling With Children by Bus
- Spring Break in Mexico
- All You Want to Know About Hyderabad
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
"Home & Garden" Categories
Stay With Us
"Home & Garden" MOST POPULAR
"Home & Garden" Lastest Articles