- 1). Measure the width of your window. Measure the length and add 20 percent more length to accommodate the seams in the pleats.
- 2). Cut the paper to your dimensions with scissors. Lay the paper flat on a worktable.
- 3). Measure and mark the paper in one-inch increments all the way down the length of the paper.
- 4). Fold the top inch of the paper back so that the back of the paper is pressed together. Use a bone scorer to press a clean and crisp fold in the paper. Continue in this manner to accordion-fold the paper in one-inch folds. Score each fold with the bone scorer.
- 5). Punch a hole in the paper at the same spot on each side all the way down the blind. Move in at least one-half inch from the edge of the paper. Hole punch four pleats at a time.
- 6). Tie a knot in the top of the cord or ribbon. String the cord through the holes to the end of the blind. Slide a cord stopper on the end of each cord. Tie a knot in the end of the cord to keep the cord stopper in place.
- 7). Attach half of the self-adhesive Velcro to the top of the window. Apply the other half to the top of the paper blind. Attach the two Velcro pieces together to hang the shade. Raise the shade slightly by pulling the cord stopper up the cord and securing.
- Advertisement -
- Advertisement -