Home improvement is an essential aspect in owning a home.
There are times when the house you just bought needs a few upgrades.
You can always choose to hire someone to do this for you.
However, hiring a contractor can be expensive.
If you are tight on the budget then you may want to consider doing this yourself.
Home improvement projects can be small and simple to big and sophisticated.
However, whatever these projects may be it usually involves have to fasten to parts together using a screw.
A screw is now the preferred fastener than a nail.
As you work on this project, you will eventually reach the point where a tap and die set can come in handy.
A tap and die set will help you thread holes and thread screws whenever it is needed.
The tap is the tool that is used to cut internal threads like those within the holes.
A die is a tool used to thread screws and this process is known as threading.
However, you do not just add threads to holes and thread screws without taking note of the sizes.
In order for the nut and screw to fit or for the hole and screw to fit, the size of the threads should match.
How do you match the threads? Refer to the tap and die chart.
Each tap drill size will have a corresponding bolt or screw size.
If you fail to match this two, then it is impossible to get the screw through the hole or through the nut.
A tap and die chart contains all the sizing that you need in order to match the nut or hole to the bolt or screw.
This chart contains the decimal in inches, the drill size and the nearest fraction.
It also contains the size of the screw that will fit with each tap size.