- 1). Raise the front end of the Ford Taurus off the ground and place the two jack stands under the frame. Lower the car onto the jack stands. Slide under the engine and place the wooden block between the engine's oil pan and the jack.
- 2). Raise the engine up slightly and loosen the metal securing bolts in the center of the motor mounts using the ratchet set. Remove one of the securing bolts completely and pull the motor mount from the fitting. Slide the new motor mount into the fitting and replace the bolt.
- 3). Repeat these steps for the opposite motor mount. Once both of the motor mounts have been replaced lower the engine. Torque the securing bolts to the specifications for that specific Ford Taurus.
- 4). Remove the jack stands with help from the jack and lower the front end of the Ford Taurus to the ground.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post