Technology Electronics

How to Fix the ELD Circuit With a High Input

By Technology Last updated Saturday, September/14/2024

1). Locate the 16-pin OBD-2 data port, which is found under the glove box in most Honda vehicles.
2). Flip open the protective cover on the port. Plug your OBD-2 tester into the port. Turn the tester on, then start the vehicle.
3). Examine the test meter. Look for P1169, corresponding to the "Label Circuit High Voltage" fault.
4). Clear the fault code from the vehicle by removing the negative battery wire for 30 seconds or more, using the ratchet and socket set. Re-attach the wire and start the vehicle. The code should be cleared, indicated by the MIL light disappearing from the dash cluster and subsequent testing at the port.