The 3 Tools That Can Totally Automate Your Twitter Account and Grow Your Following Much Faster
The fastest way, by far, to grow your Twitter account is to automate it.
This article will present the 3 tools that you can use to totally automate all of your Twitter accounts and grow your following much faster than you are doing now.
I use these 3 tools all of my Twitter accounts and they now grow at a rate of about 300 new followers every day.
Here are the 3 tools that are doing it and how I use them.
I use Twitter quite a lot for prospecting.
I currently have 9 Twitter accounts and, at the time of this writing, acquire about 300 new followers total per day.
That's not so many but I keep it conservative to avoid attracting Twitter's attention.
Here's what has worked for me so far: First and foremost, play it safe.
Try to stay under Twitter's radar by not being too aggressive in acquiring new followers.
Twitter will suspend accounts if any of its limits are breached.
It is now becoming harder and harder to get a suspended account reinstated.
The larger of a Twitter following you have, the more you have to lose if Twitter suspends one or more of your accounts.
It is probably best to stay well within the limits of the following rules: 1) Limit follows to 350 per account per day.
The maximum allowable number of new Follows per day per account is 1,000.
This includes Follows sent out and Follow-Backs.
Your best bet is to stay way below this limit to avoid triggering Twitter's attention.
If you limit the daily Follows sent out by any single account to 350 or less, you should have no problem.
I use TweetAdder to automatically keep Follows plus Follow-Backs within this limit.
2) Keep your Following / Follower Ratio to 1.
10.
After a Twitter account has acquired 2,000 followers, the 10% Rule applies.
The number of people you follow can't exceed the number of people who follow you by 10%.
In other words, if one of your Twitter accounts has reached 2,000 followers, don't allow the Follows sent out plus the FollowBacks to exceed 200, until more people begin to follow you or you unfollow a few people.
It is best to try to keep your tff (Twitter Following / Follower) ratio to be just a tiny bit under 1.
10.
I use TweetAdder to automatically keep my tff ratio 1.
09 or lower for my Twitter accounts that have more than 2,000 followers.
3) Wait at least 2 to 3 days to unfollow anyone.
Don't unfollow anyone for at least one whole day after you begin following them.
Twitter views this as churn.
That's a label you don't want from Twitter.
You'd be better off if you never unfollow anyone for at least 2 days, preferably 3.
TweetAdder handles this for me pretty easily.
4) Don't set up more than 10 Twitter accounts from 1 IP address.
If you need to set up more than 10 Twitter accounts, Google "proxy IP address" or "proxy IP server" to find out how.
This limit is why I have only 9 Twitter accounts.
I've heard of people with many more accounts, but it's risky unless you really know what you're doing.
5) Take care if you use derivatives of the same Gmail account.
If you have set up multiple Twitter accounts based on derivatives of the same Gmail account (joejohnson@gmail.
com, joe.
johnson@gmail.
com, and j.
oejohnson@gmail all forward to the same email account but can be used to set up separate Twitter accounts), be aware that if any of those accounts are suspended, all of the accounts will be suspended.
6) Tweet no more often then hourly and 10X per day.
If you are using a tweet automation tool, it is best to tweet no more often than hourly and limit to 10 per day total per account.
I use SocialOomph to automate my Tweets at regular hourly intervals during certain times of the day.
7) Don't let different accounts Tweet the same thing at the same time.
If you have multiple Twitter accounts and use an automation tool to Tweet at regular intervals, makes sure that no accounts are tweeting the same thing at the same time.
In the past, I've had a few Twitter accounts suspended for this reason.
I'm much more careful now when I'm setting up the timing, intervals, tweet content, and tweet rotation on SocialOomph.
All accounts tweet at different times and with different tweets.
If you are using Twitter for prospecting, consider automating at least some parts of your Twitter interaction.
If you are trying to achieve large numbers of Twitter followers, automation is almost mandatory.
I've had good luck with the following 3 tools: TweetAdder, SocialOomph, and bit.
ly.
Here is a little description of each and how I use it.
TweetAdder - TweetAdder automates the following tasks for me: 1) Automates Follows sent and Follow-Backs for each account.
2) Automatically keeps my tff ratio at 1.
09 for all of my accounts with more than 2,000 follows.
3) Automatically unfollows anyone who doesn't follow me back within a time limit that I specify.
I usually keep that time limit at 3 days for all accounts.
4) Provides a "safelist" of accounts I'm following that won't be unfollowed.
5) Creates a "who to follow" list for each account based on any of the following criteria that I specify: Tweet keywords, Profile data, Location, Followers of another user, and Users followed by another user.
6) Allows for completely different settings on each of my Twitter accounts.
7) Can be used to automate tweets but I find that SocialOomph is the best tool for that.
8) Can be used to automatically send replies and direct messages, but I avoid doing this because can come across as "spammy" to recipients.
9) It's quite easy to use and very intuitive.
I probably spend 15 minutes total daily on all 9 of my Twitter account making little adjustments here and there, and then, with the push of 2 buttons, all automated tasks of all accounts run all the way to completion.
If you are interested in TweetAdder, you can go to their web site to check it out.
It has a free trial.
If you find it useful, there are 4 pay versions that can be purchased with a one-time fee as follows at the time of this writing: Managing 1 Twitter profile - $55, managing 5 Twitter profiles - $74, managing 10 profiles $110, and managing unlimited profiles - $187.
I've purchased the unlimited version, but I'm only using it to manage 9 Twitter profiles at the moment.
I've also heard that another similar tool called Hummingbird does a great job at managing Follows and Unfollows, but I don't have experience with it so I can't provide any insight into it.
I can say that TweetAdder has done a very fine job for me so far and I'm now averaging about 300 new followers a day with not much effort on my part.
SocialOomph- SocialOomph works great to automate Tweets for all of my accounts.
SocialOomph has so many uses that I probably haven't tapped into even 30% of its functionality, but here's what it does for me: 1) Schedules tweets for any Twitter account that will continuously repeat themselves at any interval 24 hours or greater that I specify.
This makes SocialOomph a real Set-And-Forget tool, if you want that.
2) Creates a series of Tweets that I specify which will be sent out on a rotating basis at the same time every day (or at any interval 24 hours or greater).
I use this function to prevent any of my Twitter accounts from sending out the same Tweet at the same time every day.
3) Auto-follows anyone who follows me.
4) Has a very good URL shortening service, but I've using bit.
ly for a long time and have had good results with bit.
ly so I'll stick with bit.
ly.
If you are interested in using SocialOomph, go to their web site to try a free version.
The free version, however, does not provide the service of recurring tweets, which is the main reason that I like and use SocialOomph.
Maybe I'm just lazy but I just love "Set and Forget.
" You can easily upgrade from the free version to the pay version.
The pay version of SociaOomph costs $29.
97 per month at the time of this writing.
I've been using the pay version of SocialOomph exclusively to automate recurring and rotating Tweets for all of my Twitter accounts and it's worked very well so far.
bit.
ly - bit.
ly is not only great for creating very short URLs but it also provides excellent analytics.
I use Google Analytics tracking data to monitor anything happening on my site, but offsite, I use bit.
ly to track clicks.
I exclusively use bit.
ly to track offsite clicks so all of the click-through information is maintained in one place.
To Sum It All Up: A great combination to build a larger Twitter following includes Tweet Adder, SocialOomph, and bit.
ly.
This article will present the 3 tools that you can use to totally automate all of your Twitter accounts and grow your following much faster than you are doing now.
I use these 3 tools all of my Twitter accounts and they now grow at a rate of about 300 new followers every day.
Here are the 3 tools that are doing it and how I use them.
I use Twitter quite a lot for prospecting.
I currently have 9 Twitter accounts and, at the time of this writing, acquire about 300 new followers total per day.
That's not so many but I keep it conservative to avoid attracting Twitter's attention.
Here's what has worked for me so far: First and foremost, play it safe.
Try to stay under Twitter's radar by not being too aggressive in acquiring new followers.
Twitter will suspend accounts if any of its limits are breached.
It is now becoming harder and harder to get a suspended account reinstated.
The larger of a Twitter following you have, the more you have to lose if Twitter suspends one or more of your accounts.
It is probably best to stay well within the limits of the following rules: 1) Limit follows to 350 per account per day.
The maximum allowable number of new Follows per day per account is 1,000.
This includes Follows sent out and Follow-Backs.
Your best bet is to stay way below this limit to avoid triggering Twitter's attention.
If you limit the daily Follows sent out by any single account to 350 or less, you should have no problem.
I use TweetAdder to automatically keep Follows plus Follow-Backs within this limit.
2) Keep your Following / Follower Ratio to 1.
10.
After a Twitter account has acquired 2,000 followers, the 10% Rule applies.
The number of people you follow can't exceed the number of people who follow you by 10%.
In other words, if one of your Twitter accounts has reached 2,000 followers, don't allow the Follows sent out plus the FollowBacks to exceed 200, until more people begin to follow you or you unfollow a few people.
It is best to try to keep your tff (Twitter Following / Follower) ratio to be just a tiny bit under 1.
10.
I use TweetAdder to automatically keep my tff ratio 1.
09 or lower for my Twitter accounts that have more than 2,000 followers.
3) Wait at least 2 to 3 days to unfollow anyone.
Don't unfollow anyone for at least one whole day after you begin following them.
Twitter views this as churn.
That's a label you don't want from Twitter.
You'd be better off if you never unfollow anyone for at least 2 days, preferably 3.
TweetAdder handles this for me pretty easily.
4) Don't set up more than 10 Twitter accounts from 1 IP address.
If you need to set up more than 10 Twitter accounts, Google "proxy IP address" or "proxy IP server" to find out how.
This limit is why I have only 9 Twitter accounts.
I've heard of people with many more accounts, but it's risky unless you really know what you're doing.
5) Take care if you use derivatives of the same Gmail account.
If you have set up multiple Twitter accounts based on derivatives of the same Gmail account (joejohnson@gmail.
com, joe.
johnson@gmail.
com, and j.
oejohnson@gmail all forward to the same email account but can be used to set up separate Twitter accounts), be aware that if any of those accounts are suspended, all of the accounts will be suspended.
6) Tweet no more often then hourly and 10X per day.
If you are using a tweet automation tool, it is best to tweet no more often than hourly and limit to 10 per day total per account.
I use SocialOomph to automate my Tweets at regular hourly intervals during certain times of the day.
7) Don't let different accounts Tweet the same thing at the same time.
If you have multiple Twitter accounts and use an automation tool to Tweet at regular intervals, makes sure that no accounts are tweeting the same thing at the same time.
In the past, I've had a few Twitter accounts suspended for this reason.
I'm much more careful now when I'm setting up the timing, intervals, tweet content, and tweet rotation on SocialOomph.
All accounts tweet at different times and with different tweets.
If you are using Twitter for prospecting, consider automating at least some parts of your Twitter interaction.
If you are trying to achieve large numbers of Twitter followers, automation is almost mandatory.
I've had good luck with the following 3 tools: TweetAdder, SocialOomph, and bit.
ly.
Here is a little description of each and how I use it.
TweetAdder - TweetAdder automates the following tasks for me: 1) Automates Follows sent and Follow-Backs for each account.
2) Automatically keeps my tff ratio at 1.
09 for all of my accounts with more than 2,000 follows.
3) Automatically unfollows anyone who doesn't follow me back within a time limit that I specify.
I usually keep that time limit at 3 days for all accounts.
4) Provides a "safelist" of accounts I'm following that won't be unfollowed.
5) Creates a "who to follow" list for each account based on any of the following criteria that I specify: Tweet keywords, Profile data, Location, Followers of another user, and Users followed by another user.
6) Allows for completely different settings on each of my Twitter accounts.
7) Can be used to automate tweets but I find that SocialOomph is the best tool for that.
8) Can be used to automatically send replies and direct messages, but I avoid doing this because can come across as "spammy" to recipients.
9) It's quite easy to use and very intuitive.
I probably spend 15 minutes total daily on all 9 of my Twitter account making little adjustments here and there, and then, with the push of 2 buttons, all automated tasks of all accounts run all the way to completion.
If you are interested in TweetAdder, you can go to their web site to check it out.
It has a free trial.
If you find it useful, there are 4 pay versions that can be purchased with a one-time fee as follows at the time of this writing: Managing 1 Twitter profile - $55, managing 5 Twitter profiles - $74, managing 10 profiles $110, and managing unlimited profiles - $187.
I've purchased the unlimited version, but I'm only using it to manage 9 Twitter profiles at the moment.
I've also heard that another similar tool called Hummingbird does a great job at managing Follows and Unfollows, but I don't have experience with it so I can't provide any insight into it.
I can say that TweetAdder has done a very fine job for me so far and I'm now averaging about 300 new followers a day with not much effort on my part.
SocialOomph- SocialOomph works great to automate Tweets for all of my accounts.
SocialOomph has so many uses that I probably haven't tapped into even 30% of its functionality, but here's what it does for me: 1) Schedules tweets for any Twitter account that will continuously repeat themselves at any interval 24 hours or greater that I specify.
This makes SocialOomph a real Set-And-Forget tool, if you want that.
2) Creates a series of Tweets that I specify which will be sent out on a rotating basis at the same time every day (or at any interval 24 hours or greater).
I use this function to prevent any of my Twitter accounts from sending out the same Tweet at the same time every day.
3) Auto-follows anyone who follows me.
4) Has a very good URL shortening service, but I've using bit.
ly for a long time and have had good results with bit.
ly so I'll stick with bit.
ly.
If you are interested in using SocialOomph, go to their web site to try a free version.
The free version, however, does not provide the service of recurring tweets, which is the main reason that I like and use SocialOomph.
Maybe I'm just lazy but I just love "Set and Forget.
" You can easily upgrade from the free version to the pay version.
The pay version of SociaOomph costs $29.
97 per month at the time of this writing.
I've been using the pay version of SocialOomph exclusively to automate recurring and rotating Tweets for all of my Twitter accounts and it's worked very well so far.
bit.
ly - bit.
ly is not only great for creating very short URLs but it also provides excellent analytics.
I use Google Analytics tracking data to monitor anything happening on my site, but offsite, I use bit.
ly to track clicks.
I exclusively use bit.
ly to track offsite clicks so all of the click-through information is maintained in one place.
To Sum It All Up: A great combination to build a larger Twitter following includes Tweet Adder, SocialOomph, and bit.
ly.