Instructions

Hooking Up Your Charter Cable Box

1

Screw the coax cable into the wall outlet. Connect the same cable to the digital receiver port labeled "Cable In."
2

Take the red RCA cable and connect it from the red "Audio Out" port located on the receiver to the red port on the TV. Take the white RCA cable and connect it from the white "Audio In" port located on the receiver to the white port on the TV. Connect the last RCA cable, which is yellow, from the "Video Out" port on the receiver to the yellow port on the TV.
3

Plug both the TV and the receiver into an available electrical outlet. Turn on all the devices. Use the menu accessible via the TV's remote to select the correct ports for each cable.
4

Activate the receiver. To do this, call 888-GET-CHARTER (888-438-2427). Verify your home telephone number, or the number registered to the account. Press 3 for "Technical support" when prompted. When you hear the recording listing the choices within the optional menu, press 1 to reset your cable converter box. Listen to the converter refresh message and then hang up.