- 1). Examine the tile adhesive you used to install the tiles for dryness before grouting the tile. To be safe wait at least an hour after installing the tile before applying grout. Remove tile spacers, if used during the tile installation, when the adhesive is dry.
- 2). Wipe excess tile adhesive from the tile installation off the tile with a damp sponge and scrape excess adhesive between the joints using a flathead screwdriver. Be careful not to scratch the tile with the screwdriver.
- 3). Mix your selected grout in a plastic container according to the manufacturer's instructions. The most commonly used type of grout for ceramic tile is grout containing sand, for additional durability. Sanded grout comes in an array of colors so that you can choose the perfect color for your tile. Darker colors are often better in kitchens where grease can splash onto the wall.
- 4). Dip the edge of a rubber float into the grout, and spread the grout diagonally across the tile. Press the edge of the float firmly when drawing the float across the tile so that you pack the grout tightly in the joints. Continue this process until you've grouted the entire backsplash.
- 5). Allow the grout to sit until it becomes somewhat firm. Wipe the backsplash with a damp sponge to remove excess grout from the surface of the tile. Be sure the sponge is damp and not wet as too much moisture can damage the grout, which may take several days to completely harden.
- 6). Shape the grout lines by running a narrow rounded tool, such as a spoon, stick or the end of a toothbrush, down each line of grout to make the lines consistent in height and shape.
- 7). Wipe the backsplash again with a damp sponge to remove the excess grout from shaping the lines.
- Advertisement -
- Advertisement -