How to Make a Catapult out of a Hanger and a Spoon
- 1). Cut the wire hanger at one of the bottom corners. Make a second cut next to the curved hanger portion at the top. Make the second cut on the side of the curved portion away from where you made the first cut. This removes one entire side of the triangle, as well as the curved hanger.
- 2). Set the flat bottom portion of the wire hanger on the piece of cardboard or wood to serve as the base. The angled portion of the wire hanger should be facing up. Tape the wire hanger to the base with duct tape.
- 3). Position the spoon along the angled portion of the wire hanger so the spoon extends beyond the cut end of the hanger with the spoon portion facing toward the ceiling away from the wire piece. The handle of the spoon and the wire should overlap. Tape the spoon into place by wrapping duct tape around the spoon handle and wire.